位置: 潘吉齡 > 職涯檔案 > 個人檔案
姓名: 潘吉齡
系所: 朝陽科技大學 / 營建工程系 [數位教學紀錄]
研究領域: cold-formed steel, light-weight building
辦公(研究)室: E420.1 & E402
1. University of Missouri -Rolla / Civil (博士, 1986-08 ~ 1992-12)
1. Lai, J.R., Chung, S.Y., Yang, B.H., Wu, S.M., and Pan, C.L., "Numerical Study on Enhancing the Bearing Capacity of Shallow Foundations Using Geosynthetics," ASCE Geotechnical Special Publication, Vol. 245, pp 64-70. (EI), 2014.
2. Lin, S.H., Pan, C.L., and Hsu, W.T., "Monotonic and Cyclic Loading Tests for Cold-Formed Steel Wall Frames Sheathed with Calcium Silicate Board," Journal on Thin-Walled Structures, Vol. 74, pp 49-58. (SCI), 2014.
3. Lin, J.H., Pan, C.L., Lee, T.K., Lin, S.H., and Shan, M.Y., "The Study of Amending for the Specification and Commentary of Structural Design of Cold-Formed Steel Building," ournal of Architecture, No. 86, pp 13-23 (SSCI), 2013.
4. Chi-Ling Pan & Ming-Yang Shan, "Monotonic Shear Tests of Cold-Formed Steel Wall Frames with Sheathing," Journal on Thin-walled Structures, Vol. 49, No. 2, pp 363-370 (SCI), 2011.
5. Lue, D.M., Chung, P.T., Liu, J.L., and Pan, C.L., "The Compressive Strength of Slender C-shaped Cold-formed Steel Members with Web Openings," International Journal of Steel Structures, Vol. 9, No. 3, pp 231-240 (SCI), 2009.
6. Pan, C.L., Lin, S.H., Yu, C.P., and Lin J.Y., "The Study of High Performance Steel Adopted in Building Structure," Journal of Architecture (Special Issue of Technology), No. 68, pp 55-70 (TSSCI), 2009.
7. Peng, J.L., Pan, C.L., Chen, K.H., and Chan, S.L., "Structural Analysis of Scaffolding with Plank and Anchor Rod during Construction," Nineteenth International Specialty Conference on Cold-Formed Steel Structures, pp 127-145 (EI), Oct, 2008.
8. Lin, S.H., Pan, C.L., and Yu, C.P., "Computed Flexural Buckling Stress for Cold-Formed Stainless Steel Columns," Nineteenth International Specialty Conference on Cold-Formed Steel Structures, pp 97-110. (EI), Oct, 2008.
9. King, W.S., Chen, W.F., Duan, L., and Pan, C.L., "Education Improvement in Construction Ethics," Journal of Professional Issues in Engineering Education & Practice, Forum, Vol. 134, No. 1, pp 12-19. (SSCI), Jan, 2008.
10. Pan, C.L., "Shear lag effect on bolted L-shaped cold-formed steel tension members," Eighteenth International Specialty Conference on Cold-Formed Steel Structures, pp 679-694. (EI), 2006.
11. Pan, C.L. and Peng, J.L., "Performance of Cold-Formed Steel Wall Frames under Compression," Steel & Composite Structures, Vol. 5, No. 5. (SCI), 2005.
12. Pan, C.L., "Prediction of the Strength of Bolted Channel Sections in Tension," Journal on Thin-walled Structures, Vol.42, pp1171-1198. (SCI), 2004.